| About NQE |
| Contact Us |
| Our Clients |
Oil Separation Equipment
On this page you will find a selection of oil separation equipment from control panels used in conjunction with the VGS Oil Separator, to portable wash mats for cars. Should you not find the oil separation equipment needed, we will endeavour to provide the product specific to your requirements.
- First Flush
- Control Panels
- Float Switches
- Floating Skimmers
> SK Oil Oil-Grease Skimmers
> Stainless Steel Oil Skimmer- Bilge Water Recycling
- MYCELX Infused Filtration Units
- Portable wash mat
- Flexi Bund
Cost effective, Sydney Water board approved.
The Challenge
Over the years we have discovered a reoccurring problem with float switches failing prematurely when used to directly switch VGS pumps. The problem being that the float switched is not rated to switch the inductive load of the pump motor. While the float switch is rated at 10 amps electrically this refers to 10 amps resistive load only (AC1). This means that the switch usually fails within six (6) months, and due to the fact it is connected directly to the mains electricity, must be changed by an electrician.
The Solution
To eliminate the load to the float switch we use a contractor to switch the pump and only use the float switch to switch the tiny load of the contactor. The easy way to do this is by provision of an NQE A1 BABY STARTER control panel.
- Use of Contractor to switch pump motors up to 4.0Kw single or three phase Low voltage (24V AC) transformer for float switch
- Float can be changed by a non-electrician cutting and joining the cable without opening the control panel
- Auto-Off-Manual switch so if the float switches fails or gets jammed the pit can still be lowered by operation the pump via the manual switch
- A service technician can be arranged at the client's convenience. A 1.5m lead for plug in to an existing 240V outlet
- This can reduce the electrical install cost
- Save more money in future on electrician costs and breakdowns!
For Enquiries/Orders please see our contact us page
NQ Environmental can help provides custom or standard float switches in many shapes and materials. Whether you desire an inexpensive plastic float switch or a rugged stainless steel float switch, we can help!
For Enquiries/Orders please see our contact us page
SK21 is a fixed body oil or grease skimmer with an easily removable trash basket.
Please enquire for whole product range.
- EFFICIANCY The micro Oil Skimmer will skim oil and water from the surface of the collection pit, ensuring any oil quickly enters the separator and is dealt with rather than pumping from the bottom of the pit leaving the oil behind to build up.
- PUMP PROTECTION The Micro Oil Skimmer floats so the water is drawn from the surface of the collection pit preventing the pump picking up sludge and grit, which builds up on the bottom of the pit. The chance of damaging the pump or blocking the suction line with sludge is eliminated.
- RELIABILITY The Micro Oil Skimmer is built along very simple lines and from reliable materials, this makes it easy to work with, understand and very reliable. The inclusion of a skimmer will protect your pump and make the whole system more reliable.
The CROC Stainless steel Oil Skimmer eats up the competition when it comes to trade waste!
DURABILITY The 316 grade stainless steel construction of the unit means superior chemical, temperature and shock resistance, applications include industrial processes, mining, vehicle wash down and many more
EFFICIENCY The micro Oil Skimmer will skim oil and water from the surface of the collection pit, ensuring any oil quickly enters the separator and is delt with rather than pumping from the bottom of the pit leaving the oil behind to build up.
PUMP PROTECTION The Micro Oil Skimmer floats so the water is drawn from the surface of the collection pit preventing the pump picking up sludge and grit, which builds up on the bottom of the pit. The chance of damaging the pump or blocking the suction line with sludge is eliminated.
- Size 600mm Diameter
- Weight 6.2Kg
- Material 316L Stainless steel
- Connection 25mm (1”) BSP Male
- Max flow rate 6000L/ hr
- Comes with removable trash basket
Please contact us for information
MYCELX is a patented polymeric surfactant technology that is used to infuse all MYCELX Technologies products. The MYCELX instantly bond to hydrocarbons etc. to make them hydrophobic and viscoelastic thus removing them from the water process stream. The single pass efficiency through a MYCELX filter cartridge is 99.9% with almost no pressure drop across the filter all the way to saturation.
MYCELX polishing filters remove:
- PCBs
- Hydrocarbons Ranging from BTEX to Crude Oil
- Sheen
- Chlorinated solvents
- Organically bound metals
- POPs - Pesticides, Biocides
Some Standard Applications: > Manhole Effluent
> Boiler Blowdown
> Compressor Condensate
> Tank Farms & Terminals
> Platform Runoff
> Groundwater Remediation
> Loading Rack Runoff Water
> Plating Baths
> Parts Washing
> Bilge/Ballast Water
> Storm Water
> Post OWS Polishing
> Pre & Post Reverse Osmosis, Ultra filtration, & Ion
> Exchange
> Removal of Tramp oils from machining fluids and coolants
> Cooling Towers & Heat Exchangers
> Etc.Also available are MCYELX Infused Oil Immobilant products and Marine Products.
Port a wash mat - With Port A Wash mat, the world is your wash bay he bay!
DURABILITY The unique mesh reinforced polymer construction of the product gives superior chemical, temperature and abrasion resistance. Applications include Car sales or rental yards, work shops, shopping centres and many more.
SAFETY The bright yellow colour of the rubber makes the product easily seen under all conditions thus eliminating the trip factor. The mesh reinforcing in the polymer mat creates a non-slip surface to work on.
EASY INSTALLATION The Port A Wash mat simply rolls out on any smooth semi level surface, the battery powered pump box is put in the lowest corner and away you go. Wash water can be stored for reuse or treated and discharged.
- Size 6.0m Long x 2.7m Wide within the bunding
- Weight 15Kg
- Materials Mat -Specially developed mesh reinforced polymer Bund – Self inflating foam filled mesh reinforced polymer
- Comes with 2000L/hr Battery powered pump box and smart charger
Now Available from NQ Environmental!
Easy to install glue down - Flexi bund the easy way to contain liquids liquids!
DURABILITY The unique polymer construction of the product gives superior chemical, temperature and shock resistance. Applications include wash bays, work shops, marinas and many more.
SAFETY The bright yellow colour of the rubber makes the product easily seen under all conditions thus eliminating the trip factor.
EASY INSTALLATION Flexibund will fix to almost any surface, its flexible nature allows it follow the contour of uneven ground and it is simply fixed to the floor using Sikaflex -11FG Polyurethane sealant adhesive.
- Size 150mm High x 100mm Wide
- Weight 6.2Kg/m
- Material – Specially developed polymer
Now Available from NQ Environmental!
